Hello dear community I drive on the construction a 3axis scooter, often with 3axis low loader by way of own machine transports. Only several questions arise for me to comply with the regulations. I have the following documents with vehicle license truck tech. permissible trailer load 50t vehicle license low loader 24t Technically possible GG 30t stands. I now have an exception permission §70 STVZO, which provides me with more questions than answers. I also need a permit for the individual transport There is also what about § 32 vehiclemasen and § 34 weights and axle loads but all STVZO , i.e. only with regard to approval. Besides, I do not know how to control the axle loads at all? Now to my questions 1. Do I not in principle need a permit for road or road transport, even if I only transport material or machinery from the premises? 2. In the approval, reference is made to a TÜV guard. Didn’t I. Do I also have to carry this? 3. …. Transport of the following loads: indivisible cargo …. the disassembly/assembly causes unreasonable costs. Transporter (Vögele) Finisher with mounted side plates width approx. 2,7m Is the dismantling and mounting reasonable or not? came new from the factory without attached side parts. If I have the 20t excavator on it width 3m GG 26 T low loader I need an additional Erl Aubnis? And what else do I have to bear in mind? 4.Stands: For heavy load transports: Tow vehicle up to 20T to load. Can I carry the spoons of the excavator or a roller / mill if I pull the finished one as a “balast”? 5. If I have pulled the construction container on it or load the roller in the hollow, I have a height of about 4.2 m, is covered with it, although the Ausn.-Generation refers to the vehicle combination.