hi, my scooter (zn50qt-11 wild eagle) no longer pulls…. at 10 kmh is finished, then only slowly further up, and only downhill What I have already done: -gasifier cleaned and adjusted And nozzles blown through +new slide needle -new cylinder kit built in and valves set, cylinder head, support surfaces well cleaned -new vario with 5.5 g rolls installed, input and output shaft with brake cleaner well cleaned -motor tested on false air (standgas ruter turned and He went out) -lift filter cleaned and the hose + peel renewed -coupling and converter disassembled and cleaned -new spark plug and new battery So, that’s what I’ve done for the last few weeks…. and no improvement He’s actually going really well…. But at 10 kmh it’s stop and then it’s stuck there. Then downhill he slowly makes it to speed. In the straight goes actually no more than 15-17 kmh And uphill no chance to get over the 10 kmh(is But I don’t know because I don’t have a speedometer. In the stand I can give full throttle and easily fight with the feet against it (no great effort) When I pull the brake at full throttle he loses no power Cdi vlt in a kind of emergency mode? Have Euro 2 with 45 kmh cdi with clutch query And he was driven a lot open at that time far over 45 kmh, and then he had a wedge belt tore Ic h hope someone else has another idea… .. love greetings