Hello, I have shown a hydraulic jack as in the attached picture. For my Honda Accord this was wonderful. But with the Ford S-Max I have the problem that I can not use the jack properly without bending a fold in the long term. With the Hyundai H-1 the lift height is too low, so that I can not get the vehicle at all sufficiently high. Now I have come across something like this here:https://www.amazon.de/scheiss-seo-immer/dp/B07C1HRSFL/ For me, it turns out Now the question: Is it worth buying such an edition, or should I rather invest in a new jack? To these editions one hears a wide variety of opinions and reviews. Some are enthusiastic; the others report that the things break quite quickly. And then the question arises whether the additional height for the H-1 would be sufficient at all. If I look in at the local hardware store, there are either jacks up to 340mm od 360mm lifting height or then the big brummers for well over 100 euros – but then they come back with a flat plate, which is not an option for the S-Max. Does anyone have ideas or recommendations for me here? Best regards Stefan