Hello oldie friends, I still wanted to ask if you can adjust the switching points for the automatic transmission of the Catalina’s series 2B (series VI from ’77) – and if yes: where respectively how? I think that the switching process from the first to the second is a little too high. Especially in the case of cold engine, the switching threshold from the – 1th to the 2nd gear is about 45km/h or at approx. 35-40km/h if I take the gas away – from the 2nd to the 3rd at approx. 45-50km/h. The warm motor is then switched from the – 1th in the 2nd at approx. 30-35km/h – from the 2nd in the 3rd at 40-45km/h. With more gas of course significantly higher touring. Oil level was a little low – have already refilled a little. After that I was not able to see so much to make a significant change. The 2nd thing: In the case of a cold motor, the gearbox switches slightly rough from the first in the 2nd. Can you also change this or would be a comprehensive repair of needs ? Also here – I know, the thing with the glass ball and the distance. But maybe you still have tips and tricks where I can start. In the carburetor thread I was recommended a repair guide for the car. Are there possibly also gear settings in there?