Hello together, I recently bought an R230 for hobby. When you open the driver’s door, the indicator comes in the instrument cluster: Put the gear lever in P. It is teeming. Detach the selector lever and the electrical part sideways removed. The thing disassembles. With a brush the board cleaned and reinstalled. Same error still. Platin plugged in in the car and the LED of the fork light barrier for the switching position controlled. Light was there. A used EWM in the network. ordered to try out, unfortunately the parcel driver had no desire to wait today, so EWM not delivered. So to pass the time the EWM disassembled again and controlled the forklight barrier and the magnifying lamp. In a barrier was in the depression of the lamp something different-colored . compressed air taken and carefully blown in. That stood a few fibers out. Carefully pulled out and a whole bushel of dust from it, which had nested in the light cave. M take care of it early and control it. Would be a small victory over the fault devil again. Greetings Micha