Moin, so slowly the French drive me into madness ;-( To the problem: – 2003 partner/Berlingo construction 5MF (i.e. Stino passenger version without snap and snap) – engine code NFU (1,6er 16V petrol with 81kW/109PS) – manual gearbox 5-speed Now the clutch is through and must filter new. Ergo – search lists… Result 1: transmission code MA (is the same as in the C2/C3 saxo, Picasso etc. with 1.4er 8V and 16V – i.e. 73 or 88p petrol) Result 2: transmission code BE4 or BE4R (which is normally a m 1,6er Hdi is located) ?????? And now comes the upper quirk: 200mm is given as a coupling measure – which is only 180mm with the 1.4er MA and with the BE4 220 or 210mm (depending on the manufacturer). Wat nu? Who lies? My catalogs stupidly also say everything possible – except that of PSA, who says only one number, which does not appear in any of the others as an OEM comparison number. Sorry, but sooooo rare is the box really not ;-( What comes out everywhere is that vehicles with GKB MA 18 I have a set of Sachs (No. 3000950020), which has 200mm and is supposed to be for the MA AND this car! Hmmh… Does it fit or does it not fit?????? Greeting Roman PS: Since you can read the GKB so “extremely good” in the built-in condition, I of course have to make the body delicti first before I am smarter. But then I can also measure. Here are two of the bizarre sources: http://www.mobilv erzeichnis.de/…/…gerüßecodes-gerüßeoversicht or http://www.mobilverzeichnis.de/…/…gerüßecodes-gerüßeoversicht