Hello! I have a rather illogical test with my system, and wanted to ask you for help. First of all everything I have installed. Let’s start with the radio that is a Pioneer DEH 5800 MP. Then it goes by chinch 4 channel behind into the spare wheel dump. then work a Next Q24 and an Audio System F2-500. Front system is a Peerless Definition 6 and as a sub comes an Atomic Quantum 12″ to use. Power supply is a 35mm2 cable for additionalbatt also in the spare wheel mul A relay is installed between the two batteries, which switches with the ignition plus. Before the Twister is still a Dietz Powercap 1F switched. So much to the system, the whole thing has already worked for about 2 months, and before about two weeks I switch on the radio after the work, and only some vibrations come to light, the TMT’s even got almost equal voltage, they have moved so to speak extremely slowly. I nat. immediately the radio again, just without music at home danger On the way home thought, and then the chinch cable came into my mind, because I couldn’t really move it cheaply, and it gets squeezed at one point. So at home everything is taken apart, chinch exchanged, but look there, the same again. Then I drove to a buddy, because my radio hung in his car and it works, without mukking. later I noticed, when the chinch is off on the radio, and I touch the contacts, the vibrations also come. Ok, Final stage down, another stage temporarily installed, but the same again. which is still really funny, when I put on all 4 channels from the chinch on the radio, and I touch the contacts, the vibrations come only very quietly, but the chinch for the bass is stuck, but on the other end no connection to the stage, and I then touch the contacts, the vibrations are quite louder. Previously I tried to pull the radio mass with to the mass point in the suitcase room, where I was already with our electronic baser, and he got me on the idea with the broken stage, but it can’t be if I hang another one, which works elsewhere, and with me exactly the same noises come. If you make a frequency generator to the chin, instead of the radio, everything works fine. So, a lot of text, I hope someone takes the time to read it all, and vie Lightly there are jjemanden, who also has ne idea, what I can still try. Aso, car is an Audi B4 Kombi Thanks for your help already in advance. Dennis