Hi! Recently we had a thread about Pioneer radios from the USA. They probably can’t be changed from the American radio format (there the frequency jumps are at 0.2 Mhz and odd decimal places like: 92,1 – 92,3 – 92,5 etc). Kenwood in the USA also has that, but you can change it. So if you want to have a reasonable radio and that is as cheap as possible you can look around in the USA now. Here is the instruction from Kenwood: Quote: Thank you f or writing to us at Kenwood USA Corporation. Yes, it is possible to use any of the 1 din CD players in Europe. Here are the instructions: 1. Press and hold presets 1 and 5. 2. Press and release the RESET button, ̄ALL OFFÓ is now displayed. 3. Release presets 1 and 5. 4. Press the SOURCE button. Tuner will appear. 5. Press the AUTO button twice. This will turn off Auto Tuning. 6. Press the Tune/Track Up or Down once. A ᐅ5Ó will begin to flash to the right of the decimal point. or (depending on the model number) 1. Turn off the unit completely. 2. Simultaneously hold down presets 1 and 5. 3. While holding presets 1 and 5. Press the SOURCE button until the unit turns on. 4. Let go of Preset 1 and 5. This will put the unit in the OFFÓ mode. 5. Press the SOURCE button again to select TUNE. 6. Press the Tune/Track Up or Down once. A small ᐅ5Ó will begin to flash to the right of the decimal point. If you have any further questions or need help with anything, plea se feel free to contact us again. Greetings VentoRenner