Hello dear Doblo / Fiatkenner with my first post here, I’ll get in touch with you with a call for help. Maybe someone can start something with my error description and help with it. I start from the beginning and try to be brief. Our Doblo is a 2008er year of construction, version Malibu 1.3 Multijet 86ps (or so). Starting a year ago about my wife complained often that he doesn’t make a muks when starting, especially if it rained. about April Finally one morning (it was our wedding day and we wanted to go for breakfast) the on-board computer flickered, became completely dark, went after several key turning again and then broke “motor control unit defective, immobilizer defective, later still ABS came defective and EBD defective. After several times fuxe I changed the starter. Since then it always starts well. But the ABS and EBD defective Feh When reading out with Fiat, nothing concrete was found and so the mechanic thought it could be the battery.. so one battery from the workshop in and the other charged.. Error reset.. But error message remained in the on-board computer.. Then he said that it could be a mass problem.. so let search (170 euros) not found anything. Then he said that it might be the instrument cluster defective (500 euros).. I then got a used one at Ebay with the same data and With diagnostic software there was then an error on the right front wheel sensor.. so sensor changed. Now the Doblo is error-free according to the diagnostic software. Unfortunately I still have the 2 error messages in the display. If I start the ignition, the symbol for ABS and hand brake remains illuminated and stands in the display: ABS defective EBD defective motor off. The message ABS defective EBD remains defective even during the whole ride. Battery voltage itself seems OK (12,8V in standstill) and with running engine 14,1V. Now I have to go to Tüv in January and don’t know what else I could do. Don’t have any concerns about getting a TÜV. Although according to the diagnostic device everything is OK. Please !!! Who knows this error and found out what was the fault ? lg. Gerhard