Hello people, as I have already written below, I have removed my central safety module from my Euroline year 2001. I then ordered a new one and used the part number meinbes old as an order number. Kost “only” 270E plus fairytale tax :-(. As far as so good, BUT, the interior lighting does not work when I open the sliding door. So, everything measured and determined, the entire wiring between sliding door light switch and the safe If I walk from the safety module directly to the ground (the door light switch doesn’t do anything else) nothing happens.Then I noticed something else, I can lock the car even if the sliding door is still open!!!!! Well, every door is connected to the safety module that I can’t lock the car if one of the doors is not closed correctly (in the tailgate is even extr for this purpose). a a switch in the locking mechanism). In my opinion this is not wanted, it cannot be that I can lock the car despite the open sliding door, unfortunately the electrician of my FORD workshop of least mistrust could not help me. Since the central safety module not only regulates the internal light control but also includes the central locking, I think, for the sliding door usually the door light switch as signal whether the Now my question to all bus and Euroline drivers, is this also the case with you, i.e. locking in spite of open sliding door and no automatic inner light when sliding door open???????????? I have the dull suspicion that either the new module has a “shot”, or with me always the wrong part was installed!!! Since I bought the car only recently, I can not say o b was already like this with the old module. If this is not the case with your transe (i.e. auomatic lighting and locking only with locked door), could one of you see if he can read the part number on the central safety module??????? This would greatly simplify the procurement of the right part. Access is not easy, it sits directly in front of the glove compartment, the black box with the two large plugs on it. My part number: 1C1T-15K600-BA Since it’s a Euroline, my workshop can’t really help me anymore, because my chassis number at FORD in the system only results in a “empty” chassis, because that’s how the car was delivered to WESTFALIA. if one can help me, that would be really great, and many thanks in advance, pierre