Hello, to each other, I want to change the clutch and have to remove the drive shafts. To the left I started, the axle leg completely outside, the coupling rod and steering as well as the ABS sensor and the RADNABENMUTTER from the axle leg. I thought that when I put light blows with the rubber hammer on the axle cone, while I pull the spring leg away from the gear, the whole shot comes. Somewhere I read that there should be something glued depending on the BAU YEAR. What do I have to do to release the shaft from the armpit? What do I have to do to pull it out of the gearbox? Gear oil is already drained. I am now going to the right side and hope for answers. Thank you Markus