Good evening together! First of all a welcome greeting, since I am a new member of your forum! I have a question that I could not solve directly despite explosion drawings and workshop manual. (not to mention Google…) It is about a GSF 1200 Bandit (Bj. 1998) GV75A the following scenario:Task: Set chain tension 1. Release the nut from the main bolt 2. Adjust the tension slide (li and re) so that the chain has approx.35 mm stroke 3. tighten the axle boltNow the problem: When the main axis is tightened, the chain is tightened by itself, as soon as the axle is fully tightened, the chain is virtually tight (you can see this when tightening the chain becomes tighter). I then saw that the wheel (incl. distance sleeves and caliper holder) has 3 mm play left/right on the non-tightened axle. The swingarm is almost 3 mm to wide. By tightening the main nut, the swingarms are pulled together until the distance by wheel, sleeves et c. is limited. now the question(s): Is the topic “chain spans after” together with the too wide swing? Or is the distance even normal? Swing and rim are original. I bought the machine used and want to make it fit for the season. Greetings and a nice evening. Horb1200