Hey, my MX-3 V6 Bj. 94 is now about 10 years in a garage. Now I finally have some time and want to bring it back to life. How do I really go there? Let off the old fuel and new ones in. Hope, the petrol tank has no rust. Since the tank is unfortunately only half full. The long service life was not planned… I heard that the tank should have a drain screw below? That would be practical… There I could also with an endoscope camera pure regarding rust. Should there w If you can see it, it has to be cleaned / cleaned or does a little bit what nothing ? Does that land in the petrol filter ? Oil and oil filters come of course new. New battery is clear. Just like new tires. Do I have to do anything else ? Can I then take a start attempt ? Colleagues said that I should turn the spark plugs out so that the resistance is lower and the motor tries to rotate by hand. To see if it can be rotated or fixed. Then start with oildru Then the candles are back in and then try to start the engine. If I start the engine with expanded candles, do not shoot the sparks out of the candle plugs or not? LG