Hello, everyone with Móndeo V6! Who cares about his engine please read! My father bought last week a Mondeo V6 Bj. end 94 as an “evasive vehicle” since his MB W124 300TD with 400tkm already from time to time gets his quirks! Jetz we are with the Mondeo with 148tkm of course also test drives and I have especially looked at what the water pump or water temperature does! It is apparently a big problem with the water pumps! If you look on the Internet for Mondeo V6 indet one some with head seal damage etc. so all damages what can come through overheat! Jetz he drove with the Mondeo about 1tkm and see it begornt to cook! You don’t look at the water temp all the time. and don’t notice it when it gets too hot! We just noticed because it smelled like cooling water! We stopped with several times and motor drove the 20km to home! I then immediately removed the water pump and see there was nothing left of the shovel wheel! (rubber shovel wheel) So of course a new one had to come as soon as possible! I ordered one in the accessory of “Quinton Hazell”! It has a cast wheel and it is “only” the water pump insert! (Ford there is only the complete one for just over 160€! The one in the accessory costs just 67€ and is incl. seal! The installation of the wapu (I have the thermostat incl. seal with renewed) takes about 20 min.! I can really only recommend it to anyone! the water pump is missing as soon as possible (if it has not yet been changed by a cast wheel) to renew! If you let it be done at ford with the accessory water pump I estimate it to 130€ and who can do it himself with 80-90€uro incl. thermostat easily get along! So I wanted to get rid of it so that there is no more Mondeo V6 motor damage to buy! 😉 (The V6 is very vulnerable to heat)