When I had to look at my bookstores again, I decided to renew all 4 of them, because the old ones of 1999 have their best days behind them? Now I ordered everything from Volvo original. Bushings, plates, screws. The expansion of a bushing was done within 10 minutes and has not been a problem at all, you just have to dig up the white “plastic collar” (6mm drill) and flip the bushings with a slit screwdriver. The installation of the new bushings is the reason why I open a thread here. Bushings greased, recording cleaned up and then tries to press the bush with the car lifter. The whole car is lifted up and the bushing is not pushed in. 2. Try: The old boot disk and old bolts as a press is used and thus try to squeeze the bushing in there. (As described in the link again https://www.matthewsvolvosite.com/forums/viewtopic.php?t) But it’s got a nice break.