Hello, I’m finished with my Latin. My fiancée drives a Cooper S R56 Bj. 2011 with 184Ps. Last week the mini in the Navi showed the following error: “Motor oil pressure too low! Carefully stop and turn off engine….”. The car came to the tester after that and he detected four errors. I remember two: -Motor oil pressure too high -Mass error oil pressure sensor The other two had something to do with too high oil pressure, I unfortunately no longer know exactly what. Oil pressure was in the stationary gas with a working engine at almost 3200mbar. So yesterday a new oil pressure sensor brought and installed, because my opinion was that the error was due to the sensor. Today installed, errors deleted and test drive with tester. Under full load the oil pressure was at 10499mbar which is actually much too much. Because of the new sensor, I believe this value again again. Auto complains again because of oil pressure too low. Why too low? The tester shows too much?! Because while rolling with the traffic was scarcely 6th of the error?