Hy people, got there a problem, from the colleague his Megane simply does not want to jump on. Petrol is available and pump runs also. tested by pulling the hose and on ignition, came out petrol. The Megane also had a water damage, stood very long. Battery compartment full of dirt and water. Lied even already inside the car. Everything cleaned and the holes freed, In addition also safety compartment new, was through gammelt and plug also. After that however, the car ran still about 2 W ochen. Now all of a sudden it doesn’t start any more. I’ve read a lot about the OT-Geber here. But it seems to be ok. Had removed and measured about 300 ohms. I also checked whether it reacted, so connected to the measuring device and always with magnets over it. At the pointer of the analog measuring device, one also saw how the needle always swung out. I measured it with DC to 0.5V position I have read that it should be set to AC but mine only starts at 10V AC to mes The pointer did not react when I tested with magnets. We had also looked at all spark plugs, all so well, But there seems to be no spark. Tested with thick cable in the spark plugs and other side just before mass. No spark came. I hope you can help me further.