Hello together, I need your help. With my 98 evo the battery is no longer charged.I measure with running engine only about 12 volts.We probably only be the batt. voltage.The Lima brings still full power. I checked, as described here in the forum, the regulator. All normally connected ignition one, cable pulled from the regulator at the Lima and measured the two poles against mass. As far as so good, now I used instead of the test lamp a voltmeter.In the description stands If the test lamp lights up at one of the poles, the controller is in the ass. My voltmeter now shows about 1.5 volts at both poles.Whether ignition on or off. Is the controller now through or not? Thank you in advance Greeting Raz