Hi guys, just before I left I already read through all the possible threads, but I still can’t get any further… So my fat guy was on the lift yesterday, of course in the jack mode he confirmed. He got new brakes and a service. After the oil change, he was still on the stage, he was started to see if everything is tight, but then he didn’t show that he was in the jack mode anymore. Nothing thought about it and worked on it. Work from the stage down and he stood just as there before he was picked up. But after the first few meters he felt very funny, and look, the rear is extremely high up and normal in front. See pictures… At home then everything imaginable tried but the air suspension was not to move to a change. According to some other posts then with VCDS the chassis completely ventilated -> car at the bottom but at the back to the right much further than behind left. Then chassis ventilated -> Car evenly above as I am used to from the “high” position. Well then the chassis was still not to move over the ZAB to a height change, so chassis basic setting as I had done before. Channel 01 -> Car goes down -> VCDS says wait -> Car stays down and does not go up again (again right further down than left) Ok then again chassis ventilated, car parked (stands wrong) and again basic setting. See how it comes when logging in the flaws r “Stg does not send a seed. Error 37 blocking time active”. Ok, I thought I let him stand overnight. At the lock he left the usual air and went a little bit limper. Next day in the morning (today) everything like yesterday, car pleasantly high but right back further down as left. Then drove into the work and look, now he is perfectly high with all 4 wheels. So again basic setting tried because yes now he has no valid basic adjustment But still the error “stop time active” does someone have an idea how to move them to a basic setting? Lg and times Thank you, Philip PS: Of course he is now also complaining about the bend light