Hello to all Elk experts, recently I found out that with my Volvo V50 1.6 D (2010; 194000 km; 9101/AJA) the right front tire on the inside had gone so far that no profile was visible at all. The left tire showed no abnormalities and also has enough profile. The rear two tires had a sawtooth phenomenon on the inside – both sides. But also here enough profile. The tires were Fulda MultiControl 195/65 R15 91H. S he are all four about 1.5 years old and have a mileage of approx. 35000 km. On closer inspection also sees (straight steering position – steering wheel) that the front right tyre seems to have tilted slightly inwards (compared to the right front tyre). So this seems to be a fall error. But now I have read that you can’t adjust the fall at the front of the V50. I have now made the two front tyres new. My question: What should I do in this case? But if you can’t adjust the fall, an axle measurement is actually useless. That confirms a false fall, but I can’t do anything about it. The tyre fitter also looked at this and did not find out that there was a fault on the axle. So, for example, any joints were knocked out. Do you have any suggestions here? Manfred