Hi ho, after my CD radio in the Omega has been going out again and again for some time and no sound of itself gave me last week I bought a new radio because it was just enough for me to live with it all the time that it can go out again at any time. After the nice audio friend had pulled the old radio out of me came the first shock…lumps without end! Well great, once again had “happiness” and a previous owner caught that was only murksen. Anyway, I thought, wheel io turn and go -> Radio shows “Protect” So somewhere a short or something like that, in the operating instructions it is written that the wiring should be checked (I just didn’t have the exact wording at hand). So I put up radio again and knicked around and bent because I thought there must be a bugger in it, I also pulled all the chandelier clamps again. So radio in and it goes in, juhu…until the next occasion…there comes Protect again. I then today times during the ride the radio in and removed (have already done the exercise) and I noticed that it works if you release the plug on the radio for a short time. But that confuses me, either it should stay with the Protect or at least work smoothly afterwards?!?! Can it be that with the luscious clamps as swapped? But all cables look suitable, but will check it again more closely. If someone has a tip I would be very grateful as always!!! Many greetings