Hello and good evening together the left blue G is mine 🙂 I have a problem with the rear license plate It should be gone, because 1. I have already torn off number plate lights several times when descending from the roof tent 2. it unnecessarily restricts the ground clearance. Was not yet really a problem, but can still come AND 3. the crew of a vehicle in silver/blue today meant “that must be gone” “back license plate may not be attached to the right” (I did this after the left edge of the license plate must not be on the right side of the vehicle center or so) First of all, the short question: Does someone know how to attach to the G in this way? The car is an import from Switzerland. And of course there is nothing in it. The double AHK is registered. Where do I make it like this? 1. As a two-line license plate in size 250x200mm on the left at the height of the G300 lettering. best WITHOUT a lot of drilling, or as noble as possible… e.g. with a holder made of stainless steel etc.. Would I possibly attach large-area adhesively with an industrial Velcro tape. 2. One-line above the rear door as with the G Professional? I find the original holder expensive and ugly. Would build something for me. Although I still don’t know how to fix without drilling much. In addition, I exceed the height of 1,200mm, which I can only exceed if deeper attachment is not possible. 3. On the rear flap/in the spare wheel on a storage compartment, which I still want to build into this one? A disadvantage would be the cable guide in the lid of the storage compartment. Does anyone have any ideas? EDIT: Don’t know what had happened to the title either.