Hello – Andreas my name I currently have a Kawa GPZ 750 UT and have to do a few things to measure valve play – control chain spanning and even synchronizing the carburetor. If I have asked in the course and I have found nothing suitable here in the forum, I would like to ask the questions here in this topic below. My 1 question refers to the valve play set. I have the instruction for my bike and there is written “Crankshaft turn on T14”, gu t , I thought there will be T14 and 1 line that must stand with the fixed line in curfew. The T14 can be seen, however, T14 has 3 strokes .. I took the line, which stands exactly opposite of T, to measure. However, I am unsure :/ In the appendix is the instruction and the picture of the adjusting plate to see My 2 question My father brings me a compression meter To question how much pressure in bar the cylinders must show I found this here in the forum “The GPZ has a tolerance of 7.5 – 11.8 bar, with a maximum of 1 bar deviation over all 4 cylinders. The deviations you have are in the tolerance range, but are only all too low.” Who still signs this statement? Greeting