Hello guys, my Lupo 1.4 TDI is again unfit for driving. This time the gears don’t go in. I can move the gear lever around nicely, there is no resistance. The problem has already occurred twice. At that time just a mother was loose. After the tightening went then again with the switching. The problem was then here:http://www.bahnbilder.net/ablage/problem.jpghttp://www.bahnbilder.net/ablage/problem2.jpg For safety we then screwed on a second nut, so that the first can’t get loose again. But now the problem comes up again, although both nuts were fixed. So it seems that some gears or something has been sanded off so far that almost no contact exists anymore. With trouble and hardship we have now tightened the mother so firmly that you got in gears again. With that I drove the cart to the workshop. The workshop man said that in the worst case the complete gear has to be changed. He does not know What do you think of all this? Can you tell me exactly what that is, what it’s called and whether it can be installed separately? Or is it something completely different? Hopefully, no completely new gear has to be in, hopefully, hopefully…. Greetings, Kai