Good evening together, I’ve been doing some research, but in the end I didn’t find anything informative or relevant. I bought two new batteries (wet batteries), but with the battery tester there are pretty bad (?) values. I used two different battery testers extra – it’s striking that the one battery tester shows another SOH like the other. The measured values are similar, except for the calculated(?) SOH. Capacity: 230Ah battery technology : wet battery cold start current: 1400A/EN rated voltage: 12V battery 1: tester 1: SOH 89% – 1156A – 12.75V – 2.32MOhm / SOC 100% tester 2: SOH 71% – 1182A – 12.77V – 2.27MOhm / SOC 100% battery 2: tester 1: SOH 89% – 1147A – 12.78V – 2.34MOhm / SOC 100% tester 2: SOH 70% – 1174A – 12.80V – 2.28MOhm / SOC 100%https://www.batteryspecialist.de/long-term truck battery SMF-230Ah-12V I am surprised that such a large deviation to the 1400A cold start current specified according to specifications exists. The batteries were supplied directly on the euro pallet outside at approx. 20-23 degrees outside temperature. Measurement methods were also set to EN. May this be so?! VG and thank you!