Hello together, My Stinger is equipped with the winter rims offered by Kia. They are labeled MAK Panorama rims. Also the tyre pressure sensors offered by Kia are installed. These sensors are labeled Schrader 3131. These sensors are not allowed for these rims, as they only have simple clamp-in valves. Due to their design, they can only be used up to 210 km/h. You can find the ABE’s of the rims here, they are the numbers: rim front – E24 124R-000094 rear rim – E24 124R-000095 On page 7 the following is stated: A34 Only tubeless tires and rubber valves or metal screw valves with outer nut are permitted, which largely meet the standards (DIN, E.T.R.T.O. or Tyre and Rim) and are suitable for a valve hole diameter of 11.3 mm. For vehicle versions with a design-related maximum speed of more than 210 km/h, only metal screw valves are permitted. These rims were sold quite often in my area (large area Aachen) for the Stinger. If you are also affected, turn to your dealer and do not drive more than 200 km/h. I became aware of this problem because a valve leaked. Greeting Lok