Certain VCDS encodings

Hello together, I have been having a Seat Leon Xperience 1.8 TSi BJ 2017 for about half a year. Apart from a gas indicator problem that has recently appeared and could not be fixed since 5 visit the friendly (yet) completely satisfied. Of course, there are here and there adjustments that you would like to make. I purchased VCDS for this and implemented most of it. On the following topics, however, there are no finished instructions or reasonable approaches. I hope I can work out a common solution. (I can’t possibly be the only one that bothers me.) PS: For the sake of simplicity, I use SOLL, IS compare. 1. IS: the windows and the PD close over the remote control when closing only as long as you keep the button pressed. SOLL: Comfort close the windows and the PD at the unique pressure on the remote control. 2. IS: When closing and holding the remote control g drive in the mirrors, at the same time the rollo of the PD moves to as long as you hold down, so until the mirrors fold in and you let go, this then makes up about 2cm each time. 5 times closed the rollo hangs somewhere in the middle. SOLL: Delay time until Rollo closes or deactivation of the closure of the rollo. 3.IST: When closing and holding the remote control the mirrors drive in, when opening they are immediately extended again. SOLL: Mirror only with the one 4. IS: I have activated rain locks via vcds (gives numerous instructions)the windows are closed, the PD remains open. SOLL: Of course the PD should also be closed in case of rain I am looking forward to every post, Have fun and greet from Gochsheim.