After long back and forth it is now time to prepare the reconstruction of my beloved coupe. Had the car now stood around for 2 years and always only when I had time it started to disassemble. Lack of time just. The previous owner probably thought the car consisted only of spatula. (from side plate to wheel run it was 5 cm) after I had come down all the bad places to the appearance so that I thought about how I can get the car back. only patches od I decided to renovate it from the ground up. So I built a voice with which I could turn the car on my head. Makes itself absolutely good. Well enough for the conditions. Also I get so better everywhere to disassemble. When this was finished I disassembled the rest. So also all the rusts came to the appearance where I thought there are no ones. But since I will be the coach anyway sandblasting this is fortunately Not so important, because fortunately nothing is rusted yet. Except for a place that I have to replace with another sheet metal. Unfortunately I miss this part. Therefore also my question to you, who still has an old car that he kills anyway and this part is still I.O. please let me know. I will continue this story as soon as I have some time again and do something in the car. With a few pictures of the few places where the rust is sitting and from the side of the car (left side) Also, I had planned the conversion to a V8 in another topic, but I have come to the thought of installing a 5 cylinder 20V. Only I am still thinking about whether it will be the 7A or the AAN, although many have already said that a 20V sucker should not be bad. But until it is so far it will certainly take a whole long time. Greeting P.S. You may keep mistakes