Hi guys, got me a Satelis 125 4V a couple of weeks ago with 2350km. Its tank indicator doesn’t work and that was communicated from the beginning and I knew that too. A few days ago we opened the middle panel to get to the tank. What we discovered was a bush that took place in 2012. A “tank conversion” was done. In doing so, another petrol pump (functions because scooter drives smoothly) and another tank unit was used. It (does not work, tank indicator only flashes).Of course, the 2 original plugs were tweaked and replaced by a 4pin plug selfmade, result as said, tank indicator does not work, pump goes. So I went on a tedious search and got the complete unit including petrol pump and tanker. We can and will build the cables back and solder, for this I got cheap complete wire harness, from this we will get the 2 needed Ste To the next problem : The currently installed wrong petrol pump works with only one petrol line on it, the other connection is available, but it is plastic, so blind. The unit, the right one I now have here, has 2 connections for hoses, one for the petrol line (the slightly yellowish one) and the other I don’t know what it is for. I have also not been able to discover another hose in the scooter, unless it has been completely removed b a this “tank conversion”. Can someone tell me what comes to the second connection and where the other end comes to ?? I guess it for the vacuum there, you can recognize a small vacuum box at the unit. I put in a few pictures and sincerely hope that someone can help me with the problem, I would like to reset it back in original condition and have a working tank indicator. I say thank you already in advance for help. Mfg ALMIR