The day before yesterday I stood at the intersection and wanted to turn, there suddenly garnix more the car did not take any gas and the pedal let itself to the floor plate push, Sch… Gaszug ripped I thought, so I in standags to fortunately not too distant parking lot tucked up and I had the problem sometimes chaffed – the Gszug had hung itself out. so I tried to mount the thing again and to a better overview n ́mal short the pedal removed, goes yes fix and without workze ug. I didn’t come any further, didn’t have anything to screw up. So I called the ADAC at the arrived after an hour tried, grumbled what from one comes shit, but to solve the gas train front, so you better get in he turned up the stand gas and thought I should drive so to the workshop – thank you the Statdverkehr with stand gas mhmm…. He just meant “not reparable” and drove away. I called a buddy at the came after 10 min with a wire and a tong. We shook the briefly. the gas rope and I could at least shower home with hand gas. At home I found out the problem were the completely frayed rubbers that connect the gas rope with the pedal, the cost 7 euros the piece at the friendly- way too expensive I decided, so off into the workshop and in the rubber box scrambled see since I was found still biting it and then pasting that. The morale of the shaft: one meter of wire and a tooth save 2 hours of Ze it and a call to the ADAC – due to damage you become smart. I found the problem with the suspended gas train nowhere in the forums seems probably not to happen so often… Greetings from Swabia!