Hello everyone! I have already read the signs for the distance measurement further down, but I have a question and maybe you know some advice: What happens if I am on a 3 lane highway on the left with 130 faster than the car on the middle lane, but this shortly before me changes to my track and I drive too close with it? Ok, I could then slow down strongly and restore the distance again. Unfortunately did not happen yesterday: Instead have ic h only took his foot off the gas, got slower behind him, drove still too tight (somewhat between 6 and 12 m) with approx. 110km/h and then accelerated again when he drove after his overtaking again on the middle strip. Wouldn’t everything be so tragic if there was not a distance measurement on the next bridge led. That was then when he changed again to the middle strip at the time about 150 m away. Must now believe in my driving license for 2 to 3 months because he changed the lane to mine although I was already too tight and could not keep the safety distance anymore or then could not be so much slower to restore it? Or is the measurement of the actual distance only made in the area marked on the road? When this area started, I was already past it and had enough distance Achja again, thanks to google Maps still a picture: draw the blue line The red point on the bridge is the camera on the middle strip, which I could still make out. For the area of the two green strokes I was forced to close behind the other one until he had completed his overtaking. The whole thing happened on the A46 between Hilden-West and Hilden-East, driving direction Wuppertal. I would be grateful for your opinion…