After starting, as usual, a gear was inserted and it was supposed to go. But it only went a few meters, then there was a short “knack” i.e. gearbox and end. The gear did not go out anymore and the engine did not want to go. Since then, several attempts have been made to get the gear out, to switch to idle, in vain. Also an attempt to start in this condition (with the inserted gear) remained unsuccessful. When slow release of the clutch is usually a gear. When the clutch is completely released, there is only one jock left and the engine is running out. Probably the clutch is defective. That’s why I want to go to the workshop with the car. However, I don’t know how, if the circuit is no longer working and there is some gear in it (which is currently in it, is unknown, since several attempts have been made to switch over in the meantime). Towing with a second car is due to the inserted sound. n Ganges, not possible. Does this mean that now only the towing service remains, or is there a way to tow the car, despite the sluggish gang / this “blockade”? Do you have any advice? I wanted to avoid the towing service if possible.