Hello, my `99 TDI is supposed to get track broadening, because the track width is especially at the rear compared to my AWD (XC) somehow not quite satisfactory. I thought of a small widening, so 10 mm. per side, i.e. 20 mm. per axis. But: These systems are actually only to have with longer wheel screws, and I would lose the beautiful, long chrome bolts. -Lengther wheel bolts in chromed (if necessary without longer hexagon, then the hexagon would z was sitting further inside, but at least still chrome blinking ) in M12x1,75 there is probably not? -Which plate thickness is the narrowest, which is fixed with extra screws to the wheel hub? -The aluminium rims (perfo) have inside on the contact surface to the wheel hub so “bags”, in which overstanding screw heads would have a few millimeters additional space. If one with a Dremel etc. overstanding “Nupsis” removed, there would be even a lot of space for screw heads (1 cm about). ps? Greeting Chris