Hello all, I changed both wheel bearings, wheel hubs, tyres and brake pads at my Kia Sorento (2008, 170 hp, 2.5 diesel) at the front. On the right side everything is good, but on the left side it feels as if a tooth is slipping through the drive shaft from time to time. But only up to 70 km/h, after that everything is quite normal and it rolls top. But if I come back under the 70 km/h it runs “unround”. I put myself under it again and looked at it. All screws are fixed, drive shaft It’s just as deep in the hub as on the right side and the central nut is tightened with torque. When the car is warm you notice it stronger than when it is cold. That wasn’t before the change on the left side. Someone an idea what that could be? Thank you very much and greeting Dennis