Hello guys, I need your help with the following problem: My Ome had a conrod damage, shot me 2 holes in the block motor exactly where the oil pressure sensor is sitting and exactly opposite the crankshaft sensor which he also disassembled immediately with. Now I have changed everything i.e. new block motor, new planned cylinder head and what else to change. In the stand it runs well a light ticker is to be heard what is but sometimes away and then returns again. When driving listens you can also trickle, you could say from the sound that it sounds like you’re holding a playing card to the spokes on the bike. Hydro`s ?? If you step on the accelerator pedal for a moment, something clacks in the engine compartment or under the car, but you can’t locate this right away because it sounds different from above than if you’re under the car. Oil change he also got 10W40, this was in there before. Thanks already for your help Mfg Toby