Hej, Vorweg: I’m new here and hope I’m right here. For two days I’ve been trying to convert my ventilation back to disk/footroom with my 850 with air conditioning automatic.With the damper front passenger side defroster/footroom (NR. 15) the drive shaft was broken and I repaired it. Can also be manually rotated. Unfortunately, the engine does not move a piece. I still have 4 other actuators, which I tried all, no one turns. At the climate control element in d the center console works the middle rotary knob, because if I turn on AUT the blower changes from the strength, means -> switch works between 6 and 12 o’clock. Everything on the right side, that is between disc and foot space, does nothing. I had removed and controlled the control element, everything looked good. (But also no electrical specialist) Same problem on the flap control on the driver side no.14, does not move. Is it possible that the dampers have to be adjusted first? Is it possible that the dampers have to be read out and reset performed? Unfortunately, I have no readout device. Do they just not move because they are in “emergency” or something? I am really overwhelmed… PS.: On the actuators sometimes there is a 1 and sometimes a 2. Does someone know what it has on them? Would I be happy about the answers!