Good day together, I’m writing you for the first time today because I have a little doubt. I bought a used GLC250d, where winter complete wheels were already sold with. But now I have to find out the following: My GLC250d from 2018 with the approval number: e1*2001/116*0480*28 Has installed for the winter the following rims: Rial Bavaro 8J H2 235/60 R18 ET35 In the attached extract of the ABE from Rial rims are released for the GLC. Here is e1*2001/116*0480*16. (here ge ge ge. This means that these wheels can be mounted according to this ABE. Here is the link to the ABE:https://www.rial.de/…/BAVARO%20(BR)/BR808_8,0x18/BR808_5x112_ET35_B7/00361075_BR808_5x112_ET35_B7_66,6_6a_KBA49237.pdf Now, however, both the wheel tyre combination on the Mercedes side for my GLC and the EG agree that the GLC has to be driven with ET38 at 18 inches. In my opinion, the wheel tyre combination on the side of Mercedes has to be driven with ET38. I have attached a photo of the EC conformity and the extract from the wheel tyre combination. How do I now proceed with these wheels? Can I drive these wheels and if so, do they have to be registered then? Or we have a proof that I can drive these rims easily. The previous owner has driven these rims for years. I very much hope that you will be able to contact me with these rims. m topic can give a boost! Thank you in advance and greetings! Niklas