MB Antos 2751 6×2/ENA Built 2015 – 110000km (mostly all day long) suspension: air-air, 10to VA with 385, 2 m rear shifted lift-and steerable NLF (remodelling company Paul) Hello, after a good 95000km with the first tire ex factory, due to wear a good 6 months ago the tyres of the 1st and 2nd axle were renewed at the tyre dealer. After the holiday behind’s wheel – steering wheel crooked. Set off to MB track etc., all good? Not at all. 3rd set of tires, 2nd set of rims, 3rd workshop visit incl. 3x axle adjustment. The following problem occurs since: 0km/h – approx.60km/h steering wheel straight, in addition, the steering wheel creeps backwards. Speed is reduced, no matter how and with it, (roll out, brake, long incline) exactly at 54km/h +/- 1km/h the steering wheel is jerky straight and the vehicle is rocking. I also have the feeling that the whole Fhz. sometimes does completely move. MB finds nothing. e push it on the tires. These are 100% balanced incl. balancing of the tires mounted on the Fhz. Tires dealer has such a new machine. I think it is mechanical from the beginning. MB has checked: screws/connections and bearing VA. Steering gearbox and pump, they find nothing! It occurs even without loading, then only less bad. Have a high center of gravity through the load. Fhz. takes long to calm down again after the swing. he to the stop (traffic light), he easily swings still standing. Maybe someone has a clue with which arguments I can come to the workshop. Thanks!