Moin. I have a question for the BMW-Mopped experts here: Today one of my fellows at work got a part of a BMW motorcycle brake system. The whole thing connected with the order to build a demonstration model of. I work in the company that produces parts of the Bowden trains… The part is a black plastic box with a clipped lid. The whole is a bit bigger than a tipper pack. There five Bowden trains and a two-wire cable go out. Five trains on two plastic discs. One of the trains also operates the switch on which the cable hangs. So. There can be too many parts in this way on the brake system yes nu net. I want to know now what the part is, what it does and which train comes where on the motorcycle. Two of the trains are quite short, the others are longer and have 90° bent guide tubes for the trains at the end. The fifth train has such a plastic plug with a sealing ring on it at the end… e further information. Is also net my work, we have only been there for quite a while and that has just aroused my interest. I can take some photos of it tomorrow and put it in here, but maybe someone like that also knows what I mean for a bit.