Servus Vorgeschichte: I broke the cylinder head gasket on Monday, Moped squirted out of the exhaust until it goes no more and power was also no longer there. So I completely resealed my cylinder head, renewed gear oil and cooling water and tried to kick on. Except for a few banger out of the exhaust did not do anything. With pulled choke it jumped 1 times for 1-2 seconds but then immediately died off. So I removed and cleaned the carburettor, My question is now if I have to recalibrate the ignition time, since I currently have a 2mm cylinder spacer in it because of my 44mm stroke Kw. And if so how do you do it with an Ori ignition, have read something about a ignition wedge, he should put the ZZP in front of it but where exactly does the part go. Please for a quick answer.