Hello dear audio fans, first of all to me and my knowledge: soldering yes, but a bit timid and only with magnifying glass. Multimeter available and function understood. Various installations like alarm system and repairs successful, but everything with low performance. To the problem: My power amplifier on the radio unfortunately suffered the heat death (for front) because I do not trust a exchange and also the radio should not be exchanged, the idea was born to outsource this ;-). Unfortunately I have the easier I’ve enjoyed a simple amplifier for classified ads, come tomorrow and have 350 watts according to the info. Is a 2 channel from Kennwood. So first of all I want to annoy the neighborhood less, for that I’m too old and my neighbors too. Claims on the sound quality are hardly available, it should not distort or clutter even extremely loud is unnecessary. In the car simple serial loudspeakers are installed (blue point 80W) in the front additionally ” tweeters”?! in the handle holders. It’s an old A6. First I wanted to connect the power amplifier to the Bodnetz, a bit unnecessary. Question: How do I do it the easiest and not too expensive, after all I find it unnecessary and it doesn’t make sense for me if the wiring alone exceeds the value of the vehicle. Such an Ingolstadt car takes a hair off your head anyway. Thank you so much for your help and if there are still questions, no shyness A nice weekend to all, Chistina