Hello, soon my new BMW will be delivered and I have to protect from the paint immediately by a sealing. I will use the sealing Cquartz UK from CarPro. Since I do it for the first time, I would like to know from those who already have experience what you think about this procedure: 1. Wash the car thoroughly. Start with the rims, then foam and then thoroughly wash with 2 buckets method. 2. Spray wet car with Iron X thoroughly, i.e. 3. Clean the paint with a gentle clay bar. Use without pressure and always with enough lubricant. 4. Degrease the paint, e.g. with Eraser. 5. Polish the paint with Essence from CarPro and prepare it for sealing. Essence will not be engreased with Eraser. 6. Apply the first layer of Cquartz UK thinly with the applicator in relatively no areas and remove after 20-30 seconds with a 320-350 GMS MFT. 7. When the first round is finished, after approximately one 8. Finally, apply Reload from CarPro with a 380 GSM MFT to the entire paint. 9. Do not wash the car for a week and do not let it get wet. 10. Always wash the car with the reset shampoo from CarPro.