Hi! So now the first 3000 km with my new Goodyear Eagles are down and I have to say, fabulous tires!!! So now I looked and the inside was about 0.5 – 1 mm stronger off than outside. I already know the test from last year, my SR had not kept 5000 and they were completely flat inside. I then had the axle remeasured and adjusted at Fiat and the problem seems to be fixed at least with the winter tires. Now I have inside about 4.5 – 5 mm and outside approx. 5 – 5,5, so relatively little difference – but nevertheless. I drive around with 2,7/2,8 bar in front. Lt. instruction should be 2,5 pure. It can be that this is too much. Normally he should then drive in the middle more, but is only about 1- 1,5 in the middle run, in the ratio clearly more than outside. In the driving school we have learned: too high air pressure = strong wear in the middle too low air pressure = strong wear inside and outside Want only to ask what you mean, sol I’m going down to 2.5 bar again. I’m driving around a bend and a lot of highway and relatively fast the driveways / descents, which usually go right! So relatively more right turns! I’m grateful for all the answers! Greetings