Moin, a few days ago, on the highway, the turning roller from the tooth-rhyme was knocked off. At the time I was still hoping that I was lucky and that the valves got nothing. Yesterday I was in the self-help and disassembled my engine to see what everything is defective. Unfortunately, all the outlet valves are crooked and also the valve fork opened. Inlet valves did not get anything. Then I immediately inquired what it would cost me either With approx. 800€-1000€ I am there. Now I have decided hard to sell my car. But I will sell all parts separately. It is really everything there, from A to Z and really still top. So you need something then write to me. I’ve already made a small listing which occurred to me at first glance. Fiat Bravo 1.6 16V 90PS First registration: 31.07.1996 Kilometer level: 125900 km Fo Lgende Teilen sind vorhanden: 2 Auserspigel beheitzt 2 Rückleuchten 2 Front Headlights 1 alternator 1 starter 1 servo pump 1 thermostat 1 transmission 1 speedometer 1 control unit 1 defective cylinder head (valve design defective)(outlet valves crook) 8 valves (inlet valves) springs + spring plate + fuse 1 intake camshaft incl. housing 1 outlet camshaft incl. housing 1 intake bridge 1 exhaust manifold 1 rear windscreen wiper motor 1 front windscreen wiper motor 1 electric window lifter 1 ignition coil 1 Water pump 1 Oil pump 1 Cooler 1 Grill 1 Control unit in vehicle (center) 1 Driver seat, passenger seat, rear seat 1 Timing belt set incl. tensioner and pulley (NEW) 1 Steering wheel with airbag 1 Amatur with passenger airbag 1 Gas pedal, brake pedal, clutch pedal 1 Cat 1 Light unit interior 2 window panes left+right 1 door left 1 door right 1 rear cover 1 hood 1 rear skirt 1 front skirt 1 oil tank 1 tank 4 tyres 1 central lock If the part you are looking for is not listed et is, write to me and I’ll see if I have it!