super… write the whole text again after a 404er Hello together, I have here a Suzuki Carry (HSN/TSN 7102/507, I know now by heart ). My previous owner is in front left one with the rear slid. Side plate dented (thankfully unscrewable, I can repair myself) and headlight housing several times broken, see below. The previous owner has pinned the headlight and the broken screw-on angle with a pile of silicone. Really stable Even if the bonsaibus has already made a TÜV. I would have liked to have this neat. The part is an exotic – spare parts in Germany so there is no, at least not for the headlight, therefore I have to work with what is there. As a donor I bought a used headlight in Japan for about nine euros. Unfortunately, not exactly the same, the scattering disc is definitely different and on the back is missing the Auf otherwise it doesn’t look bad. (Original: Koito 100-32082 vs replacement: Koito 100-32084) I am currently thinking about cutting out the splitters/fractures on a large scale and replacing them with cut-out pieces from the dispenser. Then I have much less fractured seams. For stabilizing/fixing I would put something on it and screw it up (fiberglass mat or suitable thermoplastic). Are there any other ideas? How would you proceed?