Dear forum! I have the following problem: After installing a VW RCD510 radio in my Golf V (BJ 2006, 1K) I had to install a newer CANBUS gateway. With the VCDS software I saved the long coding of the old gateway bit for bit in the screenshot. Unfortunately I can not transfer the coding of the old gateway into the new gateway, since there are only 3 bytes left there. About the build list (so much I have read from various YouTube videos and forum contributions) I have d the installed components are activated. Unfortunately this does not lead to the solution of the problem. The ECU is still reported as incorrectly coded. I have attached the corresponding error logs and screenshots. I would be very pleased about constructive help. Here is a short overview of the gateways used: 19 Gateway old: 1K0 907 530 F Gateway H10 0120 Coding: 3D0F0B00070000 19 Gateway new: 7N0 907 530 AA J533 Gateway H41 1632 Coding: 350000 Many greetings Christian Theis