So guys are new here and to get in I already have the first problem I own a phaeton 4.2 v8 bj 2004 with 330 000km on it So the camshaft adjusters went broken about 3 months ago so I replaced them directly together with the chain everything nice and well running everything no clackers only now the error camshaft and crankshaft position do not fit together so I disassembled it again and checked the control times fits everything so then have ic hh thought that the camshaft sensor defective is also newly made same error motor control unit also renewed same error Then I had the muzzle full and bought a motor with 130 000€ everything was installed running quietly after 10 min Zack exactly the same error and Only on bench 2 So then there is for phaeton a rod where you need for the timing belt change where you have set the camshaft centered the motor onot and see the rod does not fit bench 2 is too far down Now the question is how to put it back in order And that’s not 3 teeth, maybe so 6 teeth where missing but then he wouldn’t have jumped well I really hope someone can help me