Hello guys, I’ve had an XC70 BJ 2008 for 2 weeks. I chose the car because I was very satisfied with my V70 BJ 2006 and wanted to upgrade again. Unfortunately I noticed that sporadically the heater simply doesn’t start. So when I get home from work the timer for the next morning. Now it happened to me several times that the heater just didn’t start and the corresponding timer was on “OFF”. This morning was It was so that the heater was set to 7:05. I had already finished earlier and got into the car by 6:50. The heater did not run and also the timer for 7:05 was on “AUS”. I checked every time if the timer is really set. If I place the timer and then close the driver’s door the car shows once again in the instrument cluster that the heater was set. The direct start has always worked and with the timers it works mostly, But not always. Now I wanted to ask if I could possibly overlook anything. I assumed that the heater would behave like the V70 2. There it was that the interior was really warm. I have already read out the heater, but no errors were indicated. Maybe I can see that the heater only starts up to this or that temperature (this morning 6°C and the heater didn’t start). n difference between timer 1 and 2? In the instrument cluster, next to the large heating symbol in the display (which indicates that a timer has been set) there is always a 2, should this tell me something? Or is the battery possibly too weak? The car always starts reliable and I have not yet seen any warning. Maybe someone has a tip for me here. Thank you.