Air conditioning AUTO – function (is that normal?)

Hello guys, I have discovered a small phenomenon with my S60II MY11, which I would like to know now if that’s how it is, or if the software is bouncing. I usually drive with the air conditioning system including the AUTO function. So it lights up the light on the car and on AC. Unfortunately, it’s just that with the car function practically no air comes from the air outlets towards the body. It only comes from the wide strip at the WSS. So if I start at -1° and a uf AUTO, it takes a certain time before it gets pleasantly warm. If I now manually place on body & head/window, then it blows pleasantly as it should from all other ejectors as well. I’m not quite sure, but I imagine that before the last 2.0 update that was still different. There came the air from all currents at the setting AUTO. How is that with you? Do you have an explanation? Should I address this to a new update? PS: In addition, since the Upd ate the switching behavior of the GT in the cold condition strongly deteriorated. (in the warm condition it has improved) The first 2 KM he gets virtually no gear in and it feels as if instead of the 400 only 40 NM would lie on. At some point the WÜK closes and everything runs as it should. Feels like an old Multitronic. .. to me it is quite clear that this should be so – but it is annoying, because you can not speed up quickly but is always busy with the car at 2000 U/min – 2500 U/min. At full throttle (I know you don’t make it cold!) the speed would probably rise to 3500 U/min and the speed would only increase slowly. Do you have any idea to fix these ‘problems’? Thank you!