All lights play crazy at the Audi A3 1.2 Sportsback from 2011

Hello Phaeton municipality, I know this is the Phaeton Club. In the Audiforum you can’t or won’t be helped. I still dare to rely on you. Please no S-storm. I am now also proud owner of nem Audi A3 1.2 Sportsback from 2011. For a few days the headlights and turn signals do what they want. Car starts normal and the automatic transmission switches normal. At the beginning all brake lights are displayed as defective. The turn signal ratters in the tenth second. Kt. Every now and then, the warning flashing system starts on its own and changes with the dipped-beam. Virtually by ghost hand. What do I have to check or look at? I checked the fuses in the engine compartment, relays haven’t checked yet. I read it out with a simple OBD connector. Deleting the error does not work. I hope it doesn’t blow up the frame Car Scanner ELM OBD2 DTC report Selected brand: Audi VIN: WAUZZZ8PXBA089542 ===========1==================3544 Raw code: 0DD8 ECU: 09. Onboard suppl y control unit Status: During this driving cycle there is a pending error, test is blocked by other DTCs, validated and non-volatile stored, validated error at the time of the requirement exists ================================================================= 1497 Raw code: 05D9 ECU: 09. Onboard supply control unit Status: During this driving cycle there is a pending error, test is blocked by other DTCs, validated and non-volatile stored Audi: Front Right Turn Signal Lamp-M7; lamp for === 1505 Raw code: 05E1 ECU: 09. Onboard supply control unit Status: During this driving cycle there is a pending error, test is blocked by other DTC, validated and non-volatile stored Audi: Rear Right Turn Signal Lamp-M8; lamp for flashing light rear right-M8 =============================== 2896 Raw code: 0B50 ECU: 09. Onboard supply control unit Status: pending fault present, During this driving cycle there is an ansteh Audi: Submission of a control signal to the left module of LEDs for daylight and parking lights; control for LED module left for daytime running light and standing light ============================= 2898 Raw code: 0B52 ECU: 09. Onboard supply control unit Status: Upcoming malfunction present, During this driving cycle there is a pending error, test conditions are met, validated and non-volatile memory t Audi: Submission of a control signal to the right module of LEDs for daylight and parking lights; control for LED module right for daytime running light and standing light =================6======================== 1504 Raw code: 05E0 ECU: 09. Onboard supply control unit Status: Upcoming fault present, During this driving cycle there is a pending error, test conditions are met, valid and non-volatile Audi: License Plate Light-X; license plate light-X ===========7================== 0988 Raw code: 03DC ECU: 09. Onboard supply control unit Status: Upcoming fault present, During this driving cycle there is a pending error, test conditions are met, validated and non-volatilely stored Audi: Right Brake Light Lamp-M10; lamp for brake light right-M10 =============================================== 0987 Raw code: 03DB ECU: 09. Onboard supply control unit Status: Upcoming fault present, During this driving cycle there is a pending error, test conditions are met, Validated and non-volatile Audi: Left Brake Light Lamp-M9; lamp for brake light left-M9